Half - Wheel Well Water Tank

Finishes flush with the forward edge of your van’s wheel well so your cabinetry can start sooner. And when we say tank, we do mean “Tank” this thing is Certified “BEEFY” with extra thick wall construction. Locally Manufactured in BC, Canada! We designed this tank to have the same capacity as our original wheel tank (125L /33 US gal), in our experience you don’t want less for full time van life / extended trips. That could mean an extra few days in the backcountry or another shower compared with other tanks on the market.

Perfect for Transit | Sprinter. Raise tank by 2.5" for ProMaster

Polyethylene. Food grade CSA approved and BPA free.

DRAWINGS (open in new window):

Passenger Side

Driver Side

DIMENSIONS:

• 46.5"L x 20.5"H x 12.5"W

• 125 Liters / 33 US gal

OPTIONAL FITTINGS KIT INCLUDES:

• 2pc Nylon 1/2” MIP to 1/2” Hose Barb (Elbow)

• 2pc Nylon 1/2” MIP to 1/2” Hose Barb (Straight)

• 1pc Nylon 1” MIP to 1-1/4” Hose Barb (Straight) - For Gravity Style Fill e.g. Valterra

• 1pc Nylon 1” MIP to 1/2” Hose Barb (Straight)

• 1pc Nylon 1/2” Hose Barb Tee

• 1pc Nylon 1/2” MIP to Hose Barb Tee

• 2pc Nylon 1/2” Plug

• 2pc Teflon Tape

• 20ft - 1/2” Premium Braided Hose

• 15pc Gear Clamp (1/2”) Extended Band Type.

• 2pc Gear Clamp (1-1/4”) Extended Band Type.

• 2pc PVC Ball Valve (1/2” FIP)

Our nylon fittings are made with FDA approved high-quality first-generation resin and are NSF 61 certified. They are generally acceptable for use at working pressures up to 150 psi and will withstand temperatures as high as 75°C (167°F) and as low as -40°C (-40°F) although they should not be used below 0°C (32°F) where fluid expansion from freezing can occur. Nylon is a strong, abrasion-resistant material with excellent impact resistance. Nylon has good chemical resistance to organic solvents, oils, and fuels but is not recommended for use with strong acids and bases such as ammonium, boric acid, calcium, or sulfuric acid.

**We do not accept returns on this item.